Overview of the vacuum extender for penis enlargement

vacuum extender for penis enlargement

The purpose of extenders is to lengthen the penis in the most comfortable way. The mechanism works only if the head is firmly fixed. Wear time depends on how secure and convenient the mount is, and accordingly the rate of progression. Vacuum extenders are considered the best option, as is their improved version - the vacuum binder type. These devices appeared on the market about 10 years ago and since then have significantly replaced mechanical devices.

Design features and working principle

In a vacuum extender, the tip of the penis is not fixed with a ring or strap but is vacuumed into a special bowl (chamber, vacuum nozzle). The device works on the principle of a vacuum pump, but in this case, the effect is only on the head and the area adjacent to it. Air from the chamber, as in a pump, is pumped out by means of a pump tube or pear.

The main advantages of the model with vacuum fixation:

  • Don't dodge, don't slip;
  • Effectively correct the curvature of the male organ;
  • Do not pinch the foreskin and foreskin;
  • Suitable for micropenis;
  • Dress comfortably.

The main disadvantage of vacuum mounted stretchers is the appearance of bubbles on the top. This does not happen when machines. The damage is caused by the delamination of the tissues under the action of a vacuum. Classes cannot be continued until the blisters have healed, and since they appear frequently, the effectiveness of wearing the device is greatly reduced.

Many manufacturers complete their products with helmets to protect the head. Some models come with patch rollers that are supposed to be sealed before being placed in the cap. The subsequent gluing and removal process causes discomfort and pain.

Some men complain about the inconvenience of wearing a condom such as: the guard is not fixed on the head comfortably, it is necessary to bring the penis to a state of at least partially erect. While wearing the extender, the head drops, so a space is formed between it and the walls of the cap - the skin is again exposed to the traumatic effects of the vacuum.

Installation scheme of vacuum stretching machine:

  1. Cover your head and wear a helmet.
  2. Roll part of the silicone sleeve attached to the camera head onto the camera body.
  3. Place the penis inside the chamber, roll the silicone sleeve to the tip along the shaft.
  4. Remove excess air with a blower or pump.
  5. Fix the penis on the extension rods, adjust the length.

The part of the penis that is compressed by silicone causes discomfort and disrupts blood circulation. The trunk area is almost not extended. If the penis is about 12 cm, most of it will be under the silicone pad.

In advanced models with vacuum adhesive mounting, only the tip is sucked into the cavity and the sleeve is replaced with a flexible film. The penis and capsule are pre-lubricated with a special lubricant, then the glans is brought to the opening of the chamber and sucked into it with several movements of the bulb. Then it is disconnected, the device is firmly fixed on the head. To remove it, simply turn the valve at the top of the chamber. The lubricant adheres to the film head, preventing the formation of voids, which eliminates the appearance of bubbles.

Using

Before the first fitting of the vacuum extender, length begins to be established - the size of the erect penis. In the future, the compression force is regulated by the springs on the rod (on loaded spring models): if the scale is fully visible (the tracks do not close) there is no tension. If there is no perceptible tension with fully screwed bars, the additional length is increased using the rods included in the kit. The tensile force of the stretcher (belt system) can be determined using a household spring scale.

It is not possible to immediately establish a great tension: it is possible to compact the albuginea covering the cavernous bodies, aggravate erections, edema of the glans, failure to develop and even reduce the length of the penis. . Within a month, a light adaptive load is introduced. The extender is worn for no more than 1-2 hours with a tension of 200-400 g, up to 500g, when the tissues of the penis get used to stretching, you should switch to a more stretchy mode: 6-8 hours a day(not necessarily continuously) with a load of 1. 1 kg. The extender can be worn at its maximum length (traction) from as little as 4 weeks.

Energy growth program:

  • Twist the extender to the length of the erect penis, tension 300-600 g;
  • When put on, the load can be increased up to 1kg;
  • Wear for 2 hours a day without a break or spend 2 sessions, 1. 5 hours each. One day off per week is required.

It is important to measure the length of the penis (stretched, not erect) after each exercise. The gain indicates the effectiveness of the selected program. If the penis decreases, then it is necessary to rest for 2-3 days.

In a year, with the help of a vacuum extender, it is possible to increase the length of the penis by 3-4 cm and its circumference by 1 cm. In young people, growth occurs faster than in adult men, due to the high elasticity of the tissues. The results also depend largely on the density of the protein coat.

Contraindications

Before buying a vacuum extender, you should consult a doctor - the doctor will help determine the presence of contraindications to its wearing. The main ones include the following:

  1. Violation of blood clotting, fragile vessels. Vacuum will stimulate the appearance of hematoma.
  2. Prostate tumor, prostatitis.
  3. Scrotal hernia.
  4. Sexual infections.

It is very dangerous to use a vacuum extender while under the influence of painkillers, drugs or alcohol. You should not put the device at night - in a dream it is easy to miss the moment when the onset of hypoxia of the tissues is caused by excessive compression, and a spontaneous erection at night is also very dangerous.

Overview of popular models

Most urologists and urologists recommend their patients to use a vacuum system with vacuum binder to increase penis size. The soft film protects the tip from damage by preventing direct contact with the vacuum. The vacuum adhesive model is also considered comfortable and effective. Kit includes camera, pear, rod, membrane set of various sizes, extension rod, gel. There are detailed instructions on how to properly mount and wear the device. The maximum extender length is 32 cm.

There is a set to upgrade the strap and a loop extender. However, its cost is very high, so it is easier to buy a vacuum extender.

complete set of a vacuum extender for penis enlargement

The Korean extension clip is positioned by the manufacturer as the most comfortable to wear with the addition of a head extension function. Fasten by vacuum bonding method. The kit includes 3 membranes, 8 screw extension pins.

Methods used:

  1. A membrane of suitable diameter is stretched over the edges of the chamber, lubricated with lubricant (along with the tip of the penis);
  2. Cameras are placed on the bars;
  3. The shaft of the penis is placed in the lengthening machine, the tip is inserted into the chamber;
  4. The pear pumps the air out.

The device from a Swiss company is a vacuum extender designed for long-term wear. According to men, it is recognized as the most comfortable. The kit includes 3 vacuum chambers with a condom attached inside, 4 cuffs, 2 protective caps, a pump tube. The model includes a belt (stretch) fixation system, which allows the use of the extender in public places.

User manual:

  • A protective helmet is worn on the head.
  • The penis is inserted between the extension rods, which are wound until optimal tension is achieved.
  • Insert the tip into the chamber of the appropriate size (with a slide attached to determine the size), roll the condom onto part of the stem.
  • A pump in the form of an accordion is attached to the chamber, with the help of which air will be pumped out.

If necessary, the slats are removed, a member with a camera on top is pulled to the belt by the straps.

Some make homemade extenders using bicycle pump housings, plastic fittings, silicone, and plumbing. It is very difficult to make a truly functional and safe device with your own hands. In terms of quality, such crafts are often inferior to cheap Chinese stretching machines.

Comment

Man, 44: "I've been wearing a belt stretcher for half a year now. The increase in length is 2 cm - a remarkable result. I supplement my traction with jelq and hanging weights, but rarely.

Man, 25 years old: "I ordered a Chinese device and I'm thinking of returning it or exchanging it for a Korean device before it's too late. It's uncomfortable to wear, the penis is swollensqueeze to the point of stomach upset, there is no doubting the effectiveness of any such condition.

Inference

Swiss, Korean and German manufactured vacuum extenders are officially recognized as an effective means of penis enlargement. Equipped with detailed video tutorials, which eliminates misuse. It is important to note that wearing the extender regularly is just as important a condition for success as its quality.